Eight: Click Open at PUTTY (blank screen will appear), and switch on the router then see if you can get any information from putty just like this:
Switch off router and get ready for tricky part..Note: if you cant see anything, just change RX and TX wire in step three at part 1 then restart this process..
Nine: Switch ON the router and hitting ctrl+C quickly until you see this CFE screen:
if cant get to there, just keep trying..
Ten: When you can get int CFE screen, Type: e nvram and hit enter then hit y (make sure CAPSLOCK OFF).
Ten: Go to IE and type 192.168.1.1 in address bar and you should see this page:
Update your firmware with this version EN1.01 (more stable than TH1.01) Or just switch OFF your router and switch ON back to use default firMware GE1.00..
MORE PICTURE IN HERE
Thanks..
This comment has been removed by the author.
ReplyDeletebonjour.
ReplyDeletej'ai le mémé problème avec mon d-link dsl-2750u j'ai le fait un mis a jour version russe:
http://ftp.dlink.ru/pub/ADSL/DSL-2750U/Firmware/1.0.14/DSL_2750_v1.0.14_cfe_fs_kernel
ça marche très très bien après deux jour j'ai le passer une autre mis a jour :
ftp://ftp.d-link.co.za/D-LinkFTP/pdfs/products/DSL-2750U/Firmware/Gan5.CT02W-B-DLR4B065-DAF.EN_upgrade
cette fois il es briqué.
alors j'ai chercher beaucoup sur le net m'ai j'ai pas trouver une solution pour ce modem.
son broadcom:bcm43225kmlg.
voila une photo de mon modem:
http://dc659.4shared.com/download/dSABEsFLce
quelle qu'un peu m'aidé???
merci
Hi. My dlink 2750u router got bricked recently. No lights are blinking. but while connecting to pc via rj45 cable, it shows light. but no IP. Can it be unbricked with this method?
ReplyDelete