ok, this is what i do...
get ready with your router..
ROUTER A (main router DSL 2750U) ROUTER B (Bridge router DSL 2640B)
1: Login to your router then go to http://192.168.1.1/wlwds.cmd and choose "Acess Point" at AP Mode and "Disabled"
at Bridge Restrict, and click Aplly/Save..
2: Go to this http://192.168.1.1/lan.html and Enable DHCP Server
and set DHCP IP Address Range between 192.168.1.9 to 192.168.1.255 and click Aplly..
3: Then go to this http://192.168.1.1/wlcfg.html and choose your wifi channel EG: 6
Then Write all this information from your router A...
Wireless name
Security key and type
Wifi channel number EG: 6
4: Logout your router A and and prepare your router B..
5: Take a LAN cable then connect it to your router B and your computer
(IMPORTAN: disconnect your connection with roter A)
6: Power ON your router B and reset it...
7: SET STATIC IP in your computer for your LAN connection. EG: 192.168.1.22
8: Login to ROUTER B and Go to this http://192.168.1.1/lan.html and in Router IP Address fill it with
192.168.1.2 and Disable DHCP Server and click apply..
9: Login to your router B via 192.168.1.2 and login then
Set your wifi security key and type same as ROUTER A in this address http://192.168.1.2/wlsecurity.html
10: Set your Wifi name and channel number same as your ROUTER A in this address http://192.168.1.2/wlcfg.html..
11: go to http://192.168.1.2/wlwds.cmd and choose "Acess Point" at AP Mode and "Enabled/scan"
at Bridge Restrict.. wait about 15 sec then tick Your SSID and BSSID in remote bridge MAC Address..
12: Remove your Static IP for your LAN connection that we make in step 6 early..
13: Restart Your Router B and wait for 2 minutes..
14: At this step, you should be able to access Router A at 192.168.1.1,router B at 192.168.1.2
ans surf the internet...
15: If all works fine, unplug your lan cable and we have Done!
Thank's a lot. I have seen the light.
ReplyDeletei guess this method only work with dsl2640b provided by TM (malaysia)...
ReplyDeleteI dont quite understand. But what if I have 2 x 2750U router and I want to wireless bridge them? and 2nd router which I can use ethernet cable to connect to all other equipment and connect to internet?
ReplyDeletePlease if you can email me the solution to peng0316@gmail.com. Much appreciated!
DeleteI setup the routers as mentioned. I'm also able to select the 1st router from the 2nd router's "Wireless bridge" page. However, I can't ping the first router if I'm connected to the 2nd (via LAN/wifi) and vice-versa. There's also no internet on the 2nd router.
ReplyDeleteAny tips?
I tried this with two 2750Us, for some reason it can't find the other router BSSID when scanning.
ReplyDeleteHello
ReplyDeleteI currently have a DSL-2750U router modem. To connect the two networks, I bought a DIR-605L to connect the two routers with the WSD protocol. I followed DIR-605l's instructions, but no matter how hard I try, I can't find the 2750 option on the 2750 router menu.in Dir-605l didn't find scan network to find DSL-2750U SSID and BSSID in remote bridge MAC Address !
Please advise whether this router can be connected by WSD or not.
If your answer is Yes please help me !
Tnx a lot